York 492-23236-010 Pressure Sensor Kit

York 492-23236-010 Pressure Sensor Kit
Details:
Genuine original factory new YORK pressure sensor kit, P/N 492-23236-010, includes pressure transducer and wiring harness. Original Johnson Controls Genuine Parts.
Send Inquiry
Description
Send Inquiry

Product Name:York 492-23236-010 Pressure Sensor Kit

111

 
 

Core Features

 

 

1. Advantage:

A chiller that refuses to start on a pressure lockout is often not reading the line pressure at all-it is reading a corroded connector or a drifted sensor diaphragm. This kit (P/N 492-23236-010) solves both at once: the transducer and its mating harness come together, so the signal path from line to control board is fresh. The sensor screws into the tap point, the harness plugs into the control board, and the chiller gets an honest pressure reading again.

 

2.Supply & Packaging:

Brand: YORK / Johnson Controls

Part No.: 492 23236 010

Contents: Pressure transducer + harness with two connectors

Origin: Baltimore, MD 21237, USA

Date: 2026-05-02

Weight: ~0.2 kg

Packing: YORK box, anti-static bubble

Condition: Genuine original factory new

 

3.Our Advantage

Techs often replace just the sensor and leave the old harness plugged in-then the new sensor fails again within months because the connector pins were already corroded. We supply the matched kit so the whole signal path is renewed. Send us your chiller model and the pressure fault code, and we will confirm whether this sensor is the right one for your circuit.

5
6
product-800-800
3
03
 

Transportation Methods

UPS, DHL,FeDex, Sea and air freight, etc

 
04
 

Package

Wooden cases and cartons and so on

11
1
2003
31

FAQ

 

Q: How can we contact you?

A:1. WhatsApp / Wechat: +86 15893891309 Violet Yan
         Email:kr.chiller@foxmail.com

Q: 2 Q: Why is this sold as a kit instead of just the sensor?

A: The kit includes the sensor and its wiring harness. When a sensor fails, the connector pins are often corroded or damaged-replacing both in one visit prevents a repeat failure from a bad connection.


Q: 3.:How do I install the sensor?
A: Recover refrigerant from the line, remove the old sensor, thread in the new one with proper sealant, connect the harness, evacuate and recharge. Follow the chiller service manual for torque and evacuation procedures.

Hot Tags: york 492-23236-010 pressure sensor kit, China york 492-23236-010 pressure sensor kit manufacturers, suppliers, 025 29139 001 Johnson Controls, carrier ac temperature sensor, Carrier HH79NZ013, Carrier HH79NZ031, Trane CAB01145, trane heat pump outside temperature sensor

Send Inquiry